NEC Express 5800 120Eg, User Manual

Page: 277 / 292

120Eg User Guide - Appendix G
G - 3
■
MegaRAID Client
Controls the RAID system on graphical screens. Install MegaRAID Client in the
Express server in which the MegaRAID controller mounted or in the management
PC that is connected through the Express server and network.
■
MegaRAID Server
Enables control of the MegaRAID controller via the network. Install MegaRAID
Server in the Express server in which the MegaRAID controller mounted.
■
MegaRAID Registration Server
Enables control of the MegaRAID controller via the network. Install in one of
NEC Express servers and management PCs that are connected through network.
The above components must be installed correctly for establishing the environment
to use Power Console Plus.
Power Console Plus components to be installed are different between the target servers
and management PC.
■
Server:
Express server in which the MegaRAID controller is mounted
Install the following three components in this server:
- MegaRAID Service Monitor
- MegaRAID Server
- MegaRAID Client
■
Management PC:
Management PC that monitors and controls servers via the network (TCP/IP)
When managing array on Terminal Server working on Windows NT Server
Version 4.0 Terminal Server Edition, prepare PC, and install Management PC
component. Management PC does not guarantee operation on Client, which used
Terminal Server, Terminal Server Emulator, WBT.
Start Power Console Plus of management PC, after the Power On machine that
installed "Server" and "Management Server".
Install the following component in this PC:
- MegaRAID Client
■
Management server:
Machine that manages all servers that are monitored and controlled by
management PCs
Install the following component in one of the servers or management PCs:
- MegaRAID Registration Server