NEC Express 5800 120Eg, User Manual

Page: 116 / 292

120Eg User Guide - Upgrading Your System
4 - 14
Installing or Removing Hard Disk Drives
Your system supports a variety of SCSI or IDE hard disk drives installed in the
system’s hard disk drive bay. Contact your sales representative or dealer for a list of
approved devices. The SCSI hard disk drive bay in your system is one of two types: a
non-hot-swap hard disk drive bay or a hot-swap hard disk drive bay. Refer to Figure 1-
4 in chapter 1 to identify the type of hard disk drive bay in your system. In each
example the internal hard disk drives are located in the SCSI disk drive bays.
Caution
■
Do not use any hard disks not approved by the server
manufacturer. If an unapproved third party's hard disk is
installed in the server, not only the hard disk but also the
server itself may be damaged. Consult your service
representative for purchasing hard disk.
■
Observe safety precautions described in “Safety Notices” on
page 1-xviii and static precautions described in “Static
Precautions” on page 4-2 before proceeding the procedures
described here.
■
For the RAID configuration, refer to the manual that comes
with the RAID controller.