NEC Express 5800 120Eg, User Manual

Page: 65 / 292

120Eg User Guide - Setting Up the System
2 - 19
Caution
If the CD-ROM drive produces large noise after the setting of a
CD-ROM, reload the CD-ROM.
To remove a CD-ROM, press the Open/Close button to eject the tray, as described for
inserting it, and then take the CD-ROM out of the tray. (The orange-lit access lamp
indicates ongoing disk access. The Open/Close button does not work while the lamp is
lit.)
Your OS may have a command to eject the tray.
When you have taken out the CD-ROM, retract the tray back in place.
When you fail to eject:
When you fail to eject the CD-ROM tray with the Open/Close button and take out the
CD-ROM from the server, follow the procedure below.
1. Press the POWER switch to power off the server. (The POWER/SLEEP lamp
goes off.)
2. Insert a metal pin of approximately 1.2 mm in diameter and 100 mm in length
(a straightened large paper clip will make a substitute) into the emergency hole
on the right front of the CD-ROM drive and gently push it in until the tray is
ejected.
Caution
■
Do not use a toothpick or plastic stick that is easy to break.
■
If the above procedure does not let you take out the CD-
ROM, contact your sales agent.