Motorola WiNG 5.4.2, System Reference Manual

Page: 438 / 836

6 - 82 WiNG 5.4.2 Access Point System Reference Guide
6. Refer to the Calibration Assignment field to define whether Smart RF Calibration and radio grouping is conducted by the
floor the access point is deployed on or building in its entirety. Both options are disabled by default.
7. Select OK to update the access point’s Smart RF Basic configuration. Select Reset to revert to the last saved configuration.
The Smart RF policy can be invoked at any point in the configuration process by selecting Activate SMART RF Policy
from the upper, left-hand side, portion of the access point user interface.
8. Select Channel and Power . Ensure the Activate SMART RF Policy remains selected so the screen’s parameters can be
updated.
Use the Channel and Power screen to refine Smart RF power settings over both the 5.0 GHz and 2.4 GHz radio bands and
select channel settings in respect to the access point’s channel usage.
Neighbor Recovery Select this radio button to enable Neighbor Recovery when a failed radio is detected
within the Smart RF supported radio coverage area. Smart RF can provide automatic
recovery by instructing neighboring APs to increase their transmit power to compensate
for the coverage loss.
Root Recovery Select this radio button to enable Root Recovery when poor root path metric is detected
within the Smart RF supported radio coverage area. Root recovery enables an access point
to recalculate the path to its root node in a mesh network if the access point’s connection
to the root node is lost due to any reason.
NOTE: The Power Settings and Channel Settings parameters are only enabled when
Custom is selected as the Sensitivity setting from the Basic Configuration screen.