manualshive.com logo in svg

Motorola WiNG 5.4.2, System Reference Manual

Share
Download
Motorola WiNG 5.4.2 System Reference Manual Download Page 775

13 - 149

13.4 Wireless Client Statistics

Statistics

The wireless client statistics display read-only statistics for a client selected from within a network and its connected access 
point. It provides an overview of the health of wireless clients in the access point and network. Use this information to assess 
if configuration changes are required to improve client performance. 

Wireless clients statistics can be assessed using the following criteria:

•

Health

•

Details

•

Traffic

•

WMM TSPEC

•

Association History

•

Graph

13.4.1 Health

Wireless Client Statistics

The 

Health

 screen displays information on the overall performance of a selected wireless client.

To view the health of a wireless client: 

1. Select the 

Statistics

 menu from the Web UI.

2. Select 

System 

from the navigation pane (on the left-hand side of the screen). Expand a RF Domain, an access point, then 

a connected client.

3. Select 

Health

.

Summary of Contents for WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands