manualshive.com logo in svg

Motorola WiNG 5.4.2, System Reference Manual

Share
Download
Motorola WiNG 5.4.2 System Reference Manual Download Page 730

13 - 104 WiNG 5.4.2 Access Point System Reference Guide 

13.3.17 VRRP

Access Point Statistics

The 

VRRP 

statistics screen displays 

Virtual Router Redundancy Protocol

 (VRRP) configuration statistics supporting router 

redundancy in a wireless network requiring high availability.

To review a selected access point’s VRRP statistics:

1. Select the 

Statistics

 menu from the Web UI.

2. Select 

System 

from the navigation pane (on the left-hand side of the screen). Expand a RF Domain and select one of its 

connected access points.

3. Select 

VRRP

.

Peer Control Cxn ID

Displays the numeric identifier for the tunnel session. This is the peer pseudowire ID for the 
session. This source and destination IDs are exchanged in session establishment messages 
with the L2TP peer.

CTRL Connection ID

Displays the router ID(s) sent in tunnel establishment messages with a potential peer device.

Up Time

Lists the amount of time the L2TP connection has remained established amongst peers sharing 
the L2TPv3 tunnel connection. The Up Time is displayed in a Days: Hours: Minutes: Seconds: 
format. If D:0 H:0 M:0 S:0 is displayed, the tunnel connection is not currently established.

Encapsulation 
Protocol

Displays either IP or UDP as the peer encapsulation protocol. The default setting is IP. UDP 
uses a simple transmission model without implicit handshakes. Tunneling is also called 
encapsulation. Tunneling works by encapsulating a network protocol within packets carried by 
the second network.

Refresh

Select the 

Refresh

 button to update the screen’s statistics counters to their latest value.

Summary of Contents for WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands