manualshive.com logo in svg

Motorola WiNG 5.4.2, System Reference Manual, Page: 641 / 836

Share
Download
Motorola WiNG 5.4.2 System Reference Manual Download Page 641

13 - 15

Figure 13-7

RF Domain - Health screen

4. The 

Domain 

field displays the name of the RF Domain manager. The RF Domain manager is the focal point for the radio 

system and acts as a central registry of applications, hardware and capabilities. It also serves as a mount point for all the 
different pieces of the hardware system file. 

5. The 

Devices 

field displays the total number of online versus offline devices in the RF Domain, and an exploded pie chart 

depicts their status. 

6. The 

Radio Quality

 field displays information 

on the RF Domain

’s RF quality. The RF quality index is the overall effectiveness 

of the RF environment as a percentage of the connect rate in both directions, as well as the retry and error rate. This area 
also lists the worst 5 performing radios in the RF Domain. 

The RF Quality Index can be interpreted as:

• 0-20 – Very poor quality

• 20-40 – Poor quality

Summary of Contents for WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments