manualshive.com logo in svg

Motorola WiNG 5.4.2, System Reference Manual

The Motorola WiNG 5.4.2 System Reference Manual is a comprehensive user resource packed with essential information and instructions to optimize your network infrastructure. Available for free download at manualshive.com, this manual provides detailed insights on configuring and utilizing the Motorola WiNG 5.4.2, ensuring seamless operations and enhanced connectivity.

Share
Download
background image

5 - 220 WiNG 5.4.2 Access Point System Reference Guide 

Figure 5-135

Profile Overrides - Network - IGMP Snooping Screen

5. Set the following parameters to configure general IGMP Snooping values.

6. Set the following for 

IGMP Querier

 configuration:

Enable IGMP Snooping

Select the box to enable IGMP Snooping on the access point. This feature is enabled by 
default.

Forward Unknown 
Multicast Packets

Select this option to enable the access point to forward multicast packets from 
unregistered multicast groups. If disabled, the 

Unknown Multicast Forward

 feature is 

also disabled for the selected VLANs. This is disabled by default.

Enable IGMP Querier

Select this option to enable IGMP querier. IGMP snoop querier is used to keep host 
memberships alive. It is primarily used in a network where there is a multicast streaming 
server and hosts subscribed to the server and no IGMP querier present. The controller can 
perform the IGMP querier role. An IGMP querier sends out periodic IGMP query packets. 
Interested hosts reply with an IGMP report packet. IGMP snooping is only conducted on 
wireless radios. IGMP multicast packets are flooded on wired ports. IGMP multicast 
packet are not flooded on the wired port. IGMP membership is also learnt on it and only 
if present, then forwarded on that port. An AP71xx model access point can also be an 
IGMP querier.

IGMP Version

Use the spinner control to set the IGMP version compatibility to one of IGMP version 1,2 
or 3. The default IGMP version is 3.

IGMP Query Interval

Sets the IGMP query interval. This parameter will be used only when the querier 
functionality is enabled. Define an interval value in Seconds, Minutes or Hours up to 
maximum of 5 hours. The default value is 60 seconds.

IGMP Robustness 
Variable

Sets the IGMP robustness variable. The robustness variable is a way of indicating how 
susceptible the subnet is to lost packets. IGMP can recover from robustness variable 
minus 1 lost IGMP packets. Define a robustness variable from 1 - 7. The default 
robustness value is 2.

Summary of Contents for WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WiNG 5.4.2

KoamTac KBD401 User Manual preview
KBD401
Brand: KoamTac Pages: 11
Grandstream Networks GWN7664LR Quick Installation Manual preview
GWN7664LR
Brand: Grandstream Networks Pages: 12
Netis WF-2409B Quick Installation Manual preview
WF-2409B
Brand: Netis Pages: 16
Cellient MHN200 User Manual preview
MHN200
Brand: Cellient Pages: 23
Cisco AIR-CAP3501E-A-K9 Getting Started Manual preview
AIR-CAP3501E-A-K9
Brand: Cisco Pages: 34
Cisco AIR-AP1210 - Aironet 1200 - Wireless Access Point External User Manual preview
AIR-AP1210 - Aironet 1200 - Wireless Access Point External
Brand: Cisco Pages: 35
Cisco Aironet 1520 Series Hardware Installation Manual preview
Aironet 1520 Series
Brand: Cisco Pages: 66
Cisco 1830 Series Getting Started Manual preview
1830 Series
Brand: Cisco Pages: 44
Cisco AIR-CAP1552H-x-K9 Installation Manual preview
AIR-CAP1552H-x-K9
Brand: Cisco Pages: 24
Cisco AIR-AP1542D-*-K9 Installation Manual preview
AIR-AP1542D-*-K9
Brand: Cisco Pages: 72
Cisco AIR-AP1010 - 1000 Series Lightweight Access Point Quick Start Manual preview
AIR-AP1010 - 1000 Series Lightweight Access Point
Brand: Cisco Pages: 36
Cisco AIR-BR1310G-A-K9 - Aironet 1310 Outdoor Access Point/Bridge Datasheet preview
AIR-BR1310G-A-K9 - Aironet 1310 Outdoor Access Point/Bridge
Brand: Cisco Pages: 14
Cisco AIR-AP1232AG-A-K9 - Aironet 1230AG - Wireless Access Point Datasheet preview
AIR-AP1232AG-A-K9 - Aironet 1230AG - Wireless Access Point
Brand: Cisco Pages: 8
Cisco 1231G - Aironet - Wireless Access Point Hardware Installation Manual preview
1231G - Aironet - Wireless Access Point
Brand: Cisco Pages: 126
Cisco AIR-AP1251AG-A-k9 Hardware Installation Manual preview
AIR-AP1251AG-A-k9
Brand: Cisco Pages: 140
Cisco AIR-AP1210 - Aironet 1200 - Wireless Access Point External Hardware Installation Manual preview
AIR-AP1210 - Aironet 1200 - Wireless Access Point External
Brand: Cisco Pages: 160
Cisco 7330 Quick Start Manual preview
7330
Brand: Cisco Pages: 28
Cisco Aironet 1300 Series Quick Start Manual preview
Aironet 1300 Series
Brand: Cisco Pages: 34

Brands by name

Popular brands

Load more brands