manualshive.com logo in svg

Motorola WiNG 5.4.2, System Reference Manual

Share
Download
Motorola WiNG 5.4.2 System Reference Manual Download Page 290

5 - 224 WiNG 5.4.2 Access Point System Reference Guide 

Figure 5-137

Profile Overrides - Network - Spanning Tree screen

6. Set the following MSTP Configuration parameters:

MSTP Enable

Select this option to enable MSTP for this profile. MSTP is disabled by default, so if 
requiring different (groups) of VLANs with the profile supported network segment.

Max Hop Count

Define the maximum number of hops the BPDU will consider valid in the spanning tree 
topology. The available range is from 7 -127. The default setting is 20.

MST Config Name

Define a 64 character maximum name for the MST region as an identifier.

MST Revision Level

Set a numeric revision value ID for MST configuration information. Set a value from 0 - 
255. The default setting is 0.

Cisco MSTP 
Interoperability

Select either the 

Enable

 or 

Disable

 radio buttons to enable/disable interoperability with 

Cisco’s version of MSTP, which is incompatible with standard MSTP. This setting is 
disabled by default.

Hello Time

Set a BPDU hello interval from 1 - 10 seconds. BPDUs are exchanged regularly (every 2 
seconds by default) and enable supported devices to keep track of network changes and 
star/stop port forwarding as required. 

Summary of Contents for WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands