Motorola WiNG 5.4.2 System Reference Manual Download Page 605

Page: 605 / 836

12 - 33

16. Select

Clear History

to clear the history displayed in the

Status

tab.

Progress

Displays the progress of the upload to the target device.

Retries

Displays the number of retires attempted for upload to the target device.

Last Status

Displays the last known status of the upload to the target device.

Summary of Contents for WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WiNG 5.4.2

Reviews:

Related manuals for WiNG 5.4.2

Brands by name

Popular brands

Motorola WiNG 5.4.2, System Reference Manual

Search results

Summary of Contents for WiNG 5.4.2

Reviews:

Related manuals for WiNG 5.4.2

Brands by name

Popular brands