Motorola WiNG 5.4.2 System Reference Manual Download Page 598

Page: 598 / 836

12 - 26 WiNG 5.4.2 Access Point System Reference Guide

11. Select

to begin the file transfer. Selecting

Cancel

reverts the screen to its last saved configuration.

12. To delete a file, select the file to be deleted and click

Delete File

button. The file is deleted immediately.

Protocol

Advanced

is selected, choose the protocol for file management. Available options

include:

• tftp

• ftp

• sftp

• http

• cf

• usb1

• usb2

This parameter is required only when

Server

is selected as the

Source

and

Advanced

is selected.

Port

Advanced

is selected, specify the port for transferring files. This option is not

available for

usb1

, and

usb2

. Enter the port number directly or use the spinner

control.

This parameter is required only when

Server

is selected as the

Source

IP Address

Advanced

is selected, specify the IP address of the server used to transfer files.

This option is not valid for

usb1

, and

usb2

. If IP address of the server is provided,

Hostname

is not required.

This parameter is required only when

Server

is selected as the

Source

Hostname

If needed, specify a Hostname of the server transferring the file. This option is not
valid for

usb1

, and

usb2

. If a hostname is provided, an

IP Address

is not needed.

This field is only available when

Server

is selected in the

From

field.

Path/File

If Advanced is selected, define the path to the file on the server. Enter the complete
relative path to the file.

This parameter is required only when

Server

is selected as the

Source

User Name

If Advanced is selected, provide a user name to access a FTP or SFTP server.

This parameter is required only when

Server

is selected as the

Source

, and the

selected protocol is

ftp

sftp

Password

If Advanced is selected, provide a password to access the FTP or SFTP server.

This parameter is required only when

Server

is selected as the

Source

, and the

selected protocol is

ftp

sftp

Target

If Advanced is selected, set the target destination to transfer the file using FTP or
SFTP.

• Select

Server

if the destination is a remote server, then provide a URL to the

location of the server resource or select

Advanced

and provide the same network

address information described above.

• Select

Access Point

if the destination is an access point.

Summary of Contents for WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WiNG 5.4.2

Reviews:

Related manuals for WiNG 5.4.2

Brands by name

Popular brands

Motorola WiNG 5.4.2, System Reference Manual

Search results

Summary of Contents for WiNG 5.4.2

Reviews:

Related manuals for WiNG 5.4.2

Brands by name

Popular brands