Motorola WiNG 5.4.2 System Reference Manual Download Page 190

Page: 190 / 836

5 - 124 WiNG 5.4.2 Access Point System Reference Guide

5.2.10 Profile Management Configuration

System Profile Configuration

The access point has mechanisms to allow/deny management access to the network for separate interfaces and protocols
(

HTTP, HTTPS, Telnet, SSH

SNMP

). These management access configurations can be applied strategically to profiles as

resource permissions dictate.

Additionally, an administrator can define a profile with unique configuration file and device firmware upgrade support.

To define a profile’s management configuration:

1. Select the

Configuration

tab from the Web UI.

2. Select

Devices

3. Select

System Profile

from the options on left-hand side of the UI.

4. Expand the

Management

menu item and select

Settings

Summary of Contents for WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WiNG 5.4.2

Reviews:

Related manuals for WiNG 5.4.2

Brands by name

Popular brands

Motorola WiNG 5.4.2, System Reference Manual

Search results

Summary of Contents for WiNG 5.4.2

Reviews:

Related manuals for WiNG 5.4.2

Brands by name

Popular brands