Motorola WiNG 5.4.2, System Reference Manual, Page: 97 / 836

5 - 31
6. If required, select a radio configuration and select the Edit button to modify the radio configuration.
Figure 5-18 Access Point Radio - Radio Settings tab
7. The Radio Settings tab displays by default.
8. Define the following radio configuration parameters from within the Properties field:
Channel Lists the channel setting for the radio. Smart is the default setting. If set to Smart , the
access point scans non-overlapping channels listening for beacons from other access
points. After the channels are scanned, it selects the channel with the fewest access
points. In the case of multiple access points on the same channel, it will select the
channel with the lowest average power level.
Transmit Power Lists the transmit power for each radio. The column displays smart if set for dynamic
Smart RF support.
Description Provide or edit a description (1 - 64 characters in length) for the radio that helps
differentiate it from others with similar configurations.
Admin Status Either select the Disabled or Enabled radio button to define this radio’s current status
within the network. When defined as Enabled , the access point is operational and
available for client support.
Radio QoS Policy Use the drop-down menu to specify an existing QoS policy to apply to the access point
radio in respect to its intended radio traffic. If there’s no existing suiting the radio’s
intended operation, select the Create icon to define a new QoS policy that can be applied
to this profile.