manualshive.com logo in svg

Motorola WiNG 5.4.2, System Reference Manual, Page: 700 / 836

Share
Download
Motorola WiNG 5.4.2 System Reference Manual Download Page 700

13 - 74

WiNG 5.4.2 Access Point System Reference Guide 

13.3.10 Mesh

Access Point Statistics

The 

Mesh

 screen provides detailed statistics on each of Mesh capable client available within the selected access point’s radio 

coverage area. 

To view the Mesh statistics:

1. Select the 

Statistics

 menu from the Web UI.

2. Select 

System 

from the navigation pane (on the left-hand side of the screen). Expand a RF Domain and select one of its 

connected access points.

3. Select 

Mesh

.

Figure 13-42

Access Point - Mesh screen

The 

Mesh

 

screen describes the following:

Client 

Displays the system assigned name of each client in the mesh network.

Client Radio MAC

Displays the MAC address of each client radio in the mesh network.

Portal

Mesh points connected to an external network and forward traffic in and out are Mesh 
Portals. Mesh points must find paths to a Portal to access the Internet. When multiple 
Portals exist, the Mesh point must select one.

Portal Radio MAC

Lists the MAC addresses of those access points serving as mesh portals.

Summary of Contents for WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments