Motorola WiNG 5.4.2 System Reference Manual Download Page 689

Page: 689 / 836

13 - 63

13.3.6 Wireless

Clients

Access Point Statistics

The

Wireless Clients

screen displays credential information for wireless clients associated with an access point. Use this

information to assess if configuration changes are required to improve network performance.

To view wireless client statistics:

1. Select the

Statistics

menu from the Web UI.

2. Select

System

from the navigation pane (on the left-hand side of the screen). Expand a RF Domain and select one of its

connected access points.

3. Select

Wireless Clients

AP Mode

Displays the operating mode of the unsanctioned access point.

Radio Type

Displays the type of the radio on the unsanctioned access point. The radio can be 802.11b,
802.11bg, 802.1bgn, 802.11a or 802.11an.

Channel

Displays the channel the unsanctioned access point is currently transmitting on.

Last Seen

Displays the time (in seconds) the unsanctioned access point was last seen on the network.

Clear All

Select the

Clear All

button to clear the screen of its current status and begin a new data

collection.

Refresh

Select the

Refresh

button to update the screen’s statistics counters to their latest values.

Summary of Contents for WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WiNG 5.4.2

Reviews:

Related manuals for WiNG 5.4.2

Brands by name

Popular brands

Motorola WiNG 5.4.2, System Reference Manual

Search results

Summary of Contents for WiNG 5.4.2

Reviews:

Related manuals for WiNG 5.4.2

Brands by name

Popular brands