Motorola WiNG 5.4.2 System Reference Manual Download Page 253

Page: 253 / 836

5 - 187

Figure 5-115

Profile Overrides – Virtual Interfaces Dynamic Routing Screen

20. Refer to the following to configure

OSPF Settings.

21. Configure the

OSPF Authentication Type

settings by selecting from the drop-down list. The available options are

None

null

simple-password

and

message-digest

22. Refer the following to configure

MD5 Authentication

keys. Select the

+ Add Row

button to add a row to the table.

23. Select the

button located at the bottom right of the screen to save the changes and overrides to the Security screen.

Select

Reset

to revert to the last saved configuration.

Priority

Select this option to enable or disable OSPF priority settings. Use the spinner to configure
a value from 0 - 255.

Cost

Select this option to enable or disable OSPF cost settings. Use the spinner to configure a
cost value from 1 - 65535.

Bandwidth

Select this option to enable or disable OSPF bandwidth settings. Use the spinner to
configure a bandwidth settings from 1 - 10,000,000 KBps.

Key ID

Set the unique MD5 Authentication key ID. The available key ID range is 1 - 255.

Password

Set the OSPF password. This value is displayed as “asterisk” (*). To display the password,
click to select the

Show

field.

Summary of Contents for WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WiNG 5.4.2

Reviews:

Motorola WiNG 5.4.2, System Reference Manual, Page: 253 / 836

Search results

Summary of Contents for WiNG 5.4.2

Reviews: