Motorola WiNG 5.4.2 System Reference Manual Download Page 300

Page: 300 / 836

5 - 234 WiNG 5.4.2 Access Point System Reference Guide

Figure 5-144

OSPF Virtual Interface - Security screen

32. Use the

Inbound IP Firewall Rules

drop-down menu to select the IP access and deny rules to apply to the OSPF dynamic

route.

33. Either select an existing IP firewall policy or use the default set of IP firewall rules. The firewall inspects OSPF route traffic

flows and detects potential attacks on the dynamic route not visible to traditional wired firewall appliances. Select the

Create

icon to define a new set of IP firewall rules that can be applied to the OSPF route configuration. Selecting

Edit

allows for the modification of an existing IP firewall rules configuration. For more information, see

Wireless Firewall on

page 8-2

34. Select the

VPN Crypto Map

to use with this VLAN configuration. Use the drop-down menu to apply an existing crypto map

configuration to this VLAN interface. Use the

Create

icon to create a new VPN Crypto Map or use the

Edit

icon to edit an

existing VPN Crypto Map configuration before applying it to this VLAN.

35. Select

to save the changes to the OSPF route security configuration. Select

Reset

to revert to the last saved

configuration.

36. Select the

Dynamic Routing

tab.

Summary of Contents for WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WiNG 5.4.2

Reviews:

Brands by name

Popular brands

Motorola WiNG 5.4.2, System Reference Manual

Search results

Summary of Contents for WiNG 5.4.2

Reviews:

Brands by name

Popular brands