manualshive.com logo in svg

Motorola WiNG 5.4.2, System Reference Manual

Share
Download
Motorola WiNG 5.4.2 System Reference Manual Download Page 698

13 - 72

WiNG 5.4.2 Access Point System Reference Guide 

13.3.9.3 Traffic Statistics

Refer to the 

Traffic Statistics

 screen to review access point radio transmit and receive statistics, data rate, and packets dropped 

during both transmit and receive operations. 

To view the access point radio traffic statistics:

1. Select the 

Statistics

 menu from the Web UI.

2. Select 

System 

from the navigation pane (on the left-hand side of the screen). Expand a RF Domain and select one of its 

connected access points.

3. Expand 

Radios

.

4. Select 

Traffic Statistics

.

Rx Physical Layer 
Rate

Displays the data receive rate for the radio’s physical layer. The rate is displayed in Mbps. 

Avg Retry Number

Displays the average number of retries per packet. A high number indicates possible network 
or hardware problems. Assess the error rate in respect to potentially high signal and SNR 
values to determine whether the error rate coincides with a noisy signal.

Error Rate

Displays the total number of received packets which contained errors for the listed radio. 

Traffic Index

Displays the traffic utilization index of the radio. This is expressed as an integer value. 0 – 20 
indicates very low utilization, and 60 and above indicate high utilization.

Quality Index

Displays an integer that indicates overall RF performance. The RF quality indices are: 

•

0 – 50

 (poor)

•

50 – 75

 (medium)

•

75 – 100

 (good)

Refresh

Select the 

Refresh 

button to update the screen’s statistics counters to their latest values.

Summary of Contents for WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands