Motorola WiNG 5.4.2, System Reference Manual

Page: 96 / 836

5 - 30 WiNG 5.4.2 Access Point System Reference Guide
5.2.4.4 Access Point Radio Configuration
Profile Interface Configuration
An access point profile can have its radio configuration modified once its radios have successfully associated to the network.
To define a access point radio configuration:
1. Select the Configuration tab from the Web UI.
2. Select Devices .
3. Select System Profile from the options on left-hand side of the UI.
4. Expand the Interface menu and select Radios .
Figure 5-17 Access Point Radios screen
5. Review the following radio configuration data to determine whether a radio configuration requires modification to better
support the network:
Name Displays whether the reporting radio is radio 1, radio 2 or radio 3. AP7131 models can
have up to 3 radios depending on the SKU. AP6522, AP6532, AP6562, AP8132 and AP7161
models have 2 radios, while AP6521 and AP6511 models have 1 radio.
Type Displays the type of radio housed by each listed access point.
Description Displays a brief description of the radio provided by the administrator when the radio’s
configuration was added or modified.
Admin Status A red “X” defines the radio’s admin status as currently disabled. A green check mark
designates the admin status as enabled.
RF Mode Displays whether each listed radio is operating in the 802.11a/n or 802.11b/g/n radio
band. If the radio is a dedicated sensor, it will be listed as a sensor to define the radio as
not providing typical WLAN support. The radio band is set from within the Radio Settings
tab.