manualshive.com logo in svg

Motorola WiNG 5.4.2, System Reference Manual, Page: 368 / 836

Share
Download
Motorola WiNG 5.4.2 System Reference Manual Download Page 368

6 - 12 WiNG 5.4.2 Access Point System Reference Guide 

6.1.2.3 PSK / None

Configuring WLAN Security

Open-system authentication can be referred to as no authentication, since no actual authentication takes place. When 
selecting PSK/None, a client requests (and is granted) authentication with no credential exchange.

6.1.2.4 Captive Portal

Configuring WLAN Security

A 

captive portal 

is guest access policy that provides guests temporary and restrictive access to the wireless network. The 

primary means of securing such guest access is the use of a captive portal. For an overview of the captive portal process and 
information on how to define a captive portal policy that can be applied to a WLAN, see 

Configuring Captive Portal Policies on 

page 9-2

.

To assign a captive portal policy to a WLAN:

1. Select the 

Configuration

 tab from the Web UI.

2. Select 

Wireless.

3. Select 

Wireless LANs

 to display a high level display of existing WLANs.

4. Select the 

Add

 button to create an additional WLAN or select an existing WLAN and 

Edit 

to modify the properties of an 

existing WLAN.

5. Select 

Security

.

6. Refer to the 

Captive Portal

 field within the WLAN security screen.

Select the 

Captive Portal Enable

 option if authenticated guess access is required with the selected WLAN. This feature 

is disabled by default.

7. Select the 

Captive Portal Policy 

to use with the WLAN from the drop-down menu. If no relevant policies exist, select the 

Create

 icon to define a new policy to use with this WLAN or the 

Edit

 icon to update the configuration of an existing captive 

portal policy. For more information, see 

Configuring Captive Portal Policies on page 9-2

. 

8. Select 

OK 

when completed to update the captive portal configuration. Select 

Reset

 to revert the screen back to the last 

saved configuration.

6.1.2.5 MAC Registration

Configuring WLAN Security

The MAC Registration feature provides returning captive portal users quicker access to the captive portal.

When a user accesses the captive portal for the first time, user information is gathered and stored. This information is matched 
with the MAC address of the device accessing the captive portal. This information is stored on board the wireless controller.

The next time the user accesses the captive portal service using the same device, he/she is authenticated immediately as the 
MAC address of the device is available in the wireless controller’s database along with the user’s identification information. 
The user saves time as identification information is not collected again speeding the logon.

The MAC Registration feature must be enabled for each captive portal WLAN.

To enable MAC Registration:

NOTE: 

Although 

None

 implies no authentication, this option is also used when 

pre-shared keys are used for encryption (thus the /PSK in the description).

Summary of Contents for WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments