manualshive.com logo in svg

Motorola WiNG 5.4.2, System Reference Manual

The Motorola WiNG 5.4.2 System Reference Manual is a comprehensive user resource packed with essential information and instructions to optimize your network infrastructure. Available for free download at manualshive.com, this manual provides detailed insights on configuring and utilizing the Motorola WiNG 5.4.2, ensuring seamless operations and enhanced connectivity.

Share
Download
background image

5 - 16 WiNG 5.4.2 Access Point System Reference Guide 

14. If a firewall rule does not exist suiting the data protection needs of the target port configuration, select the

 Create

 icon to 

define a new rule configuration.

15. Refer to the 

Trust

 field to define the following:

16. 802.1x is a IEEE protocol that defines port based network access control to wired LANs. Refer to the 

802.1x Settings

 to 

configure the following:

Trust ARP Responses

Select this option to enable ARP trust on this access point port. ARP packets received 
on this port are considered trusted and information from these packets is used to 
identify rogue devices within the network. The default value is disabled.

Trust DHCP Responses

Select this option to enable DHCP trust on this port. If enabled, only DHCP responses 
are trusted and forwarded on this port, and a DHCP server can be connected only to a 
DHCP trusted port. The default value is enabled.

ARP header Mismatch 
Validation

Select this option to enable a mismatch check for the source MAC in both the ARP and 
Ethernet header. The default value is disabled.

Trust 8021p COS values

Select this option to enable 802.1p COS values on this port. The default value is 
enabled.

Trust IP DSCP

Select this option to enable IP DSCP values on this port. The default value is enabled.

NOTE: 

Some vendor solutions with VRRP enabled send ARP packets with Ethernet 

SMAC as a physical MAC and inner ARP SMAC as VRRP MAC. If this configuration is 
enabled, a packet is allowed, despite a conflict existing.

Host Mode

Configures the Port mode for 802.1x authentication. Select 

single-host

 to bridge traffic 

from a single authenticated host. Select

 multi-host

 to bridge traffic from any host the 

wired port.

Guest VLAN

Set the Guest VLAN on which traffic is bridged from the wired port, if the port is 
unauthorized.

Port Control

Configures how the port is controlled. When set to 

Automatic

, the port is set to a state 

as received from the authentication server. When set to 

force-authorized

, any traffic on 

the port is said to be authorized and is bridged. When set to 

force-unauthorized

, any 

traffic on the port is said to be unauthorized and is not bridged.

Reauthenticate

Enables reauthentication of authorized ports. Reauthentication is used primarily to 
refresh the current state of controlled ports. When enabled, and device using the 
controlled port is forced to reauthenticate. When this happens, the controlled port is 
still in the authorized state. If reauthentication fails, the port is set as being 
unauthorized and the device(s) using the port are not allowed access.

Max Reauthenticate Count

Configures the number of times an attempt is made to reauthenticate a controlled port. 
When exceeded, the controlled port is set as unauthorized.

Maximum Request

Configures the number of times an attempt is made to authenticate with the EAP server 
before returning an authentication failed message to the device requesting 
authorization using the controlled port.

Summary of Contents for WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WiNG 5.4.2

Ubiquiti Edge Pro ERPro-8 Quick Start Manual preview
Edge Pro ERPro-8
Brand: Ubiquiti Pages: 20
Raisecom iTN201-R Hardware Description preview
iTN201-R
Brand: Raisecom Pages: 84
Maipu MT-w101 User Manual preview
MT-w101
Brand: Maipu Pages: 34
Brickhouse Security B-Link B-LINK-MIFI User Manual preview
B-Link B-LINK-MIFI
Brand: Brickhouse Security Pages: 8
Ubiquiti UniFi UBB Quick Start Manual preview
UniFi UBB
Brand: Ubiquiti Pages: 33
D-Link DAS-3248 Quick Installation Manual preview
DAS-3248
Brand: D-Link Pages: 20
D-Link DI-624M - Wireless 108G MIMO Router Quick Installation Manual preview
DI-624M - Wireless 108G MIMO Router
Brand: D-Link Pages: 12
D-Link DHP-1220AV Quick Installation Manual preview
DHP-1220AV
Brand: D-Link Pages: 36
D-Link DI-624S - AirPlus Xtreme G Wireless 108G USB Storage Router Quick Installation Manual preview
DI-624S - AirPlus Xtreme G Wireless 108G USB Storage Router
Brand: D-Link Pages: 22
D-Link DI-514 - Wireless Router Quick Installation Manual preview
DI-514 - Wireless Router
Brand: D-Link Pages: 12
D-Link DIR-412 Quick Installation Manual preview
DIR-412
Brand: D-Link Pages: 34
D-Link DIR-301 User Manual preview
DIR-301
Brand: D-Link Pages: 67
D-Link DAP-1250 Install Manual preview
DAP-1250
Brand: D-Link Pages: 12
D-Link DI-624S - AirPlus Xtreme G Wireless 108G USB Storage Router Manual preview
DI-624S - AirPlus Xtreme G Wireless 108G USB Storage Router
Brand: D-Link Pages: 106
D-Link DIR-320NRU User Manual preview
DIR-320NRU
Brand: D-Link Pages: 156
D-Link DI-724GU - Wireless 108G QoS Gigabit Office Router User Manual preview
DI-724GU - Wireless 108G QoS Gigabit Office Router
Brand: D-Link Pages: 89
D-Link DI-711 - Gateway User Manual preview
DI-711 - Gateway
Brand: D-Link Pages: 60
D-Link COVR-C1213 User Manual preview
COVR-C1213
Brand: D-Link Pages: 113

Brands by name

Popular brands

Load more brands