manualshive.com logo in svg

Motorola WiNG 5.4.2, System Reference Manual, Page: 242 / 836

Share
Download
Motorola WiNG 5.4.2 System Reference Manual Download Page 242

5 - 176 WiNG 5.4.2 Access Point System Reference Guide 

9. To edit (or override) the configuration of an existing port, select it from amongst those displayed and select the 

Edit 

button. 

The 

Ethernet Port Basic Configuration

 screen displays by default.

Figure 5-109

Ethernet Ports - Basic Configuration screen

10. Set (or override) the following Ethernet port Properties and CDP/LLDP settings:

Tag Native VLAN

A green check mark defines the native VLAN as tagged. A red “X” defines the native VLAN 
as untagged. When a frame is tagged, the 12 bit frame VLAN ID is added to the 802.1Q 
header so upstream Ethernet devices know which VLAN ID the frame belongs to. The 
device reads the 12 bit VLAN ID and forwards the frame to the appropriate VLAN. When 
a frame is received with no 802.1Q header, the upstream device classifies the frame using 
the default or native VLAN assigned to the Trunk port. A native VLAN allows an Ethernet 
device to associate untagged frames to a VLAN when no 802.1Q frame is included in the 
frame.

Allowed VLANs

Displays the VLANs allowed to send packets over the listed port. Allowed VLANs are only 
listed when the mode has been set to Trunk.

Overrides

Click the 

Clear

 to clear overrides made to this interface. This field is blank if there are no 

overrides for this configuration.

Description

Provide a brief description for the access point’s port (64 characters maximum).

Admin Status

Select the 

Enabled

 radio button to define this port as active to the profile it supports. 

Select the

 Disabled

 radio button to disable this physical port in the profile. It can be 

activated at any future time when needed.

Summary of Contents for WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments