manualshive.com logo in svg

Motorola WiNG 5.4.2, System Reference Manual, Page: 32 / 836

Share
Download
Motorola WiNG 5.4.2 System Reference Manual Download Page 32

2 - 8

WiNG 5.4.2 Access Point System Reference Guide 

Advanced WIPS Policy – States the conditions of an advanced WIPS policy 
have been invoked. WIPS prevents unauthorized access to the system by 
checking for and removing rogue access point’s and wireless clients.

Device Categorization – Indicates a device categorization policy is being 
applied. This is used by the intrusion prevention system to categorize APs or 
wireless clients as either neighbors or sanctioned devices. This enables these 
devices to bypass the intrusion prevention system.

Captive Portal – States a captive portal is being applied. Captive portal is 
used to provide captive portal services to wireless clients.

DNS Whitelist – A DNS whitelist is used in conjunction with captive portal to 
provide captive portal services to wireless clients.

DHCP Server Policy – Indicates a DHCP server policy is being applied. DHCP 
provides IP addresses to wireless clients. A DHCP server policy configures 
how DHCP provides these IP addresses.

RADIUS Group – Indicates the configuration of RADIUS Group is being 
defined and applied. A RADIUS group is a collection of RADIUS users with the 
same set of permissions.

RADIUS User Pools – States a RADIUS user pool is being applied. RADIUS 
user pools are a set of IP addresses that can be assigned to an authenticated 
RADIUS user.

RADIUS Server Policy – Indicates a RADIUS server policy is being applied. 
RADIUS server policy is a set of configuration attributes used when a RADIUS 
server is configured for AAA.

Management Policy – Indicates a management policy is being applied. 
Management policies are used to configure access control, authentication, 
traps and administrator permissions.

MeshConnex Policy – Indicates a mesh connex policy is being applied. 
MeshConnex is a hybrid proactive/on-demand path selection protocol to form 
efficient mesh paths.

Mesh QoS Policy – Indicates a mesh quality of service policy is being applied. 
This policy ensures that each mesh point in the network receives a fair share 
of overall bandwidth for its use.

Virtual Controller APs – Indicates an AP is configured as a Virtual Controller 
access point. A Virtual Controller access point can manage up to 24 access 
points of similar type deployed in a network.

Summary of Contents for WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments