Motorola WiNG 5.4.2 System Reference Manual Download Page 603

Page: 603 / 836

12 - 31

Figure 12-35

Devices Captive Portal Pages - CP Page Image File screen

10. Use the

Captive Portal List

drop-down list to select the captive portal configuration to upload to the adopted access

points.

11. Set the following file transfer configuration parameters of the required file transfer activity:

Protocol

Advanced

is selected, choose the protocol for file management. Available options

include:

• tftp

• ftp

• sftp

• http

• cf

• usb1

• usb2

This parameter is required only when

Server

is selected as the

Source

and

Advanced

is selected.

Port

Advanced

is selected, specify the port for transferring files. This option is not

available for

usb1

, and

usb2

. Enter the port number directly or use the spinner

control.

IP Address

Advanced

is selected, specify the IP address of the server used to transfer files.

This option is not valid for

usb1

, and

usb2

. If IP address of the server is provided,

Hostname

is not required.

Summary of Contents for WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WiNG 5.4.2

Reviews:

Brands by name

Popular brands

Motorola WiNG 5.4.2, System Reference Manual

Search results

Summary of Contents for WiNG 5.4.2

Reviews:

Brands by name

Popular brands