manualshive.com logo in svg

Motorola WiNG 5.4.2, System Reference Manual

Share
Download
Motorola WiNG 5.4.2 System Reference Manual Download Page 524

9 - 20 WiNG 5.4.2 Access Point System Reference Guide 

Figure 9-11

Static Bindings Add screen

13. Define the following 

General

 parameters required to complete the creation of the static binding configuration:

Client Identifier Type

Use the drop-down menu whether the DHCP client is using a 

Hardware Address 

or 

Client 

Identifier

 as its identifier type with a DHCP server.

Value

Provide a hardware address or client identifier value to help differentiate the client from 
other client identifiers.

IP Address

Set the IP address of the client using this host pool.

Domain Name

Provide a domain name of the current interface. Domain names aren’t case sensitive and 
can contain alphabetic or numeric letters or a hyphen. A

 fully qualified domain name

 

(FQDN) consists of a host name plus a domain name. For example, 
computername.domain.com

Boot File

Enter the name of the boot file used with this pool. Boot files (Boot Protocol) can be used 
to boot remote systems over the network. BOOTP messages are encapsulated inside UDP 
messages so requests and replies can be forwarded. Each DHCP network pool can use a 
different file as needed

BOOTP Next Server

Provide the numerical IP address of the server providing BOOTP resources.

Client Name

Provide the name of the client requesting DHCP Server support.

Summary of Contents for WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands