manualshive.com logo in svg

Motorola WiNG 5.4.2, System Reference Manual

Share
Download
Motorola WiNG 5.4.2 System Reference Manual Download Page 756

13 - 130 WiNG 5.4.2 Access Point System Reference Guide 

13.3.21.6 DHCP Snooping

Firewall

When DHCP servers are allocating IP addresses to clients on the LAN, DHCP snooping can be configured to better enforce the 
security on the LAN to allow only clients with specific IP/MAC addresses.

1. Select the 

Statistics

 menu from the Web UI.

2. Select 

System 

from the navigation pane (on the left-hand side of the screen). Expand a RF Domain and select one of its 

connected access points.

3. Select 

F

irewall 

and expand the menu to reveal its sub menu items

.

4. Select 

DHCP Snooping

.

Figure 13-73

Access Point - Firewall DHCP Snooping screen

Forward Dest Port

Destination port for the forward NAT flow (contains ICMP ID if it is an ICMP flow).

Reverse Source IP

Displays the source IP address for the reverse NAT flow.

Reverse Source Port

Displays the source port for the reverse NAT flow (contains ICMP ID if it is an ICMP flow).

Reverse Dest IP

Displays the destination IP address for the reverse NAT flow.

Reverse Dest Port

Displays the destination port for the reverse NAT flow (contains ICMP ID if it is an ICMP flow).

Refresh

Select the 

Refresh

 

button to update the screen’s statistics counters to their latest values.

Summary of Contents for WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands