manualshive.com logo in svg

Motorola WiNG 5.4.2, System Reference Manual

The Motorola WiNG 5.4.2 System Reference Manual is a comprehensive user resource packed with essential information and instructions to optimize your network infrastructure. Available for free download at manualshive.com, this manual provides detailed insights on configuring and utilizing the Motorola WiNG 5.4.2, ensuring seamless operations and enhanced connectivity.

Share
Download
background image

9 - 40 WiNG 5.4.2 Access Point System Reference Guide 

Figure 9-23

RADIUS Server Policy screen - Proxy tab

16. Enter the 

Proxy Retry Delay

 as a value in seconds (from 5 - 10 seconds). This is the interval the RADIUS server waits 

before making an additional connection attempt. The default delay interval is 5 seconds.

17. Enter the 

Proxy Retry Count

 field as a value from 3 - 6. This is the number of retries sent to the proxy server before giving 

up the request. The default retry count is 3 attempts.

18. Select the 

+ Add Row

 button to add a RADIUS server proxy realm name and network address. To delete a proxy server 

entry, select the 

Delete

 icon on the right-hand side of the table.

19. Enter a 50 character maximum 

Realm Name

. When the access point’s RADIUS server receives a request for a user name, 

the server references a table of realms. If the realm is known, the server proxies the request to the RADIUS server. 

20. Enter the Proxy server‘s 

IP Address

. This is the address of server checking the information in the user access request. The 

proxy server either accepts or rejects the request on behalf of the RADIUS server.

21. Enter the TCP/IP 

Port Number 

for the server that acts as a data source for the proxy server. Use the spinner to select a 

value from 1024 - 65535. The default port is 1812.

22. Enter the RADIUS client’s 

Shared Secret

 for authenticating the RADIUS proxy.

23. Select the 

Show

 check box to expose the shared secret’s actual character string. Leave the option unselected to display 

the shared secret as a string of asterisks (*).

24. Select the 

OK

 button to save the changes. Select the 

Reset

 button to revert to the last saved configuration.

Summary of Contents for WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WiNG 5.4.2

Watchguard AP225W Quick Start Manual preview
AP225W
Brand: Watchguard Pages: 11
H3C MSR900-E Routers Installation, Quick Start preview
MSR900-E Routers
Brand: H3C Pages: 2
Ruijie Networks RG-AP130-W Quick Installation Manual preview
RG-AP130-W
Brand: Ruijie Networks Pages: 12
YOKOGAWA YFGW520 User Manual preview
YFGW520
Brand: YOKOGAWA Pages: 45
AirLive W6184QAX User Manual preview
W6184QAX
Brand: AirLive Pages: 46
MeshLinx MWI-5000 User Manual preview
MWI-5000
Brand: MeshLinx Pages: 94
Evco EVlinking Wi-Fi Installer Manual preview
EVlinking Wi-Fi
Brand: Evco Pages: 18
D-Link 7000AP - Air Xpert - Wireless Access Point Quick Installation Manual preview
7000AP - Air Xpert - Wireless Access Point
Brand: D-Link Pages: 8
Sierra Wireless AirPrime BX3100 Hardware Integration Manual preview
AirPrime BX3100
Brand: Sierra Wireless Pages: 33
NEC AP400 series Features preview
AP400 series
Brand: NEC Pages: 4
Digisol DG-HR3400 User Manual preview
DG-HR3400
Brand: Digisol Pages: 86
Cerio ow-310n2 Quick Installation Guid preview
ow-310n2
Brand: Cerio Pages: 13
Connect One Wi-REACH Classic User Manual preview
Wi-REACH Classic
Brand: Connect One Pages: 38
ADB P.DGA4001N Hardware User Manual preview
P.DGA4001N
Brand: ADB Pages: 35
ADB DB 6520 Instruction And User'S Manual preview
DB 6520
Brand: ADB Pages: 38
Air Live WL-5460AP v2 Quick Setup Manual preview
WL-5460AP v2
Brand: Air Live Pages: 74
Air Live WL-5460AP User Manual preview
WL-5460AP
Brand: Air Live Pages: 72
Air Live WIAS-1200G Quick Setup Manual preview
WIAS-1200G
Brand: Air Live Pages: 74

Brands by name

Popular brands

Load more brands