manualshive.com logo in svg

Motorola WiNG 5.4.2, System Reference Manual

Share
Download
Motorola WiNG 5.4.2 System Reference Manual Download Page 367

6 - 11

somewhat poor as a standalone data protection technique, as MAC addresses can be easily spoofed by hackers who can mimic 
a trusted device within the network.

MAC authentication is enabled per WLAN, augmented with the use of a RADIUS server to authenticate each device. A device’s 
MAC address can be authenticated against an access point’s local RADIUS server (if supported) or centrally (from a datacenter). 
For RADIUS server compatibility, the format of the MAC address can be forwarded to the RADIUS server in non-delimited and 
or delimited formats:

To configure MAC authentication on a WLAN:

1. Select the 

Configuration

 tab from the Web UI.

2. Select 

Wireless.

3. Select 

Wireless LANs

 to display a high level display of existing WLANs.

4. Select the 

Add

 button to create an additional WLAN, or select an existing WLAN and 

Edit

 to modify its security properties.

5. Select 

Security

.

6. Select 

MAC

 as the Authentication Type.

Selecting MAC enables the radio buttons for the 

Open

, 

WEP 64

, 

WEP 128

, 

WPA/WPA2-TKIP

, 

WPA2-CCMP

 and 

Keyguard

 

encryption options as additional measures for the WLAN.

7. Either select an existing AAA Policy from the drop-down menu or select the 

Create

 icon to the right of the AAA Policy 

parameter to display a screen where new AAA policies can be created. A default AAA policy is also available if configuring 
a WLAN for the first time and there’s no existing policies. Select the 

Edit

 icon to modify the configuration of a selected 

AAA policy.

Authentication, Authorization, and Accounting

 (AAA) is a framework for intelligently controlling access to the wireless 

client managed network, enforcing user authorization policies and auditing and tracking usage. These combined processes 
are central for securing wireless client resources and wireless network data flows. For information on defining a new AAA 
policy, see 

AAA Policy on page 6-67

.

8. Select the

 Reauthentication

 radio button to force MAC supported clients to reauthenticate. Use the spinner control set 

the number of minutes (from 30 - 86,400) that, once exceeded, forces the EAP supported client to reauthenticate. 

9. Select 

OK 

when completed to update the WLAN’s MAC configuration. Select 

Reset

 to revert the screen back to the last 

saved configuration. 

MAC Authentication Deployment Considerations

MAC Authentication

Before defining a MAC authentication configuration on a WLAN, refer to the following deployment guidelines to ensure the 
configuration is optimally effective:

• MAC authentication can only be used to identify end-user devices, not the users themselves.

• MAC authentication is somewhat poor as a standalone data protection technique, as MAC addresses can be easily spoofed 

by hackers who can provision a MAC address on their device to mimic a trusted device.

Summary of Contents for WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands