manualshive.com logo in svg

Motorola WiNG 5.4.2, System Reference Manual

Share
Download
Motorola WiNG 5.4.2 System Reference Manual Download Page 316

5 - 250 WiNG 5.4.2 Access Point System Reference Guide 

Figure 5-156

VPN Step-By-Step Wizard - Step 2

5. In 

Step 2

 screen, configure the following parameters:

Peer

Select the type of peer for this device when forming a tunnel. Peer information can be either 

IP Address

 or 

Host Name

. Provide the IP address or the host name of the peer device.

Authentication

Configure how the devices authenticate with each other.

•

Certificate

 – The devices use certificates to authenticate with each other

•

Pre-Shared Key

 – The devices use pre-shared key to authenticate with each other. When 

this option is selected, provide the shared secret key.

Local Identity

Configure the local identity for the VPN Tunnel.

•

IP Address

 – The local identity is an IP address. Provide the IP address in the text box.

•

FQDN

 – The local identity is a 

Fully Qualified Domain Name

 (FQDN). Provide the FQDN in 

the text box.

•

Email

 – The local identity is an E-mail address. Provide the e-mail address in the text box.

Remote Identity

Configure the remote identity for the VPN Tunnel.

•

IP Address

 – The remote identity is an IP address. Provide the IP address in the text box.

•

FQDN

 – The remote identity is a 

Fully Qualified Domain Name

 (FQDN). Provide the FQDN 

in the text box.

•

Email

 – The remote identity is an E-mail address. Provide the e-mail address in the text box.

Summary of Contents for WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands