manualshive.com logo in svg

Motorola WiNG 5.4.2, System Reference Manual

Share
Download
Motorola WiNG 5.4.2 System Reference Manual Download Page 521

9 - 17

6. Select 

Add 

to create a new DHCP pool, 

Edit

 to modify an existing pool or 

Delete 

to remove a pool.

Figure 9-9

DHCP Pools screen - Basic Settings tab

If adding or editing a DHCP pool, the DHCP Pool screen displays the 

Basic Settings

 tab by default. Define the required 

parameters for the 

Basic Settings

, 

Static Bindings

 and 

Advanced

 tabs to complete the creation of a DHCP pool.

7. Set the following 

General

 parameters:

DHCP Pool

If adding a new pool, a name is required. The pool is the range of IP addresses defined for 
DHCP assignment or lease. The name assigned cannot be modified as part of the edit 
process. However, if the network pool configuration is obsolete it can be deleted. The 
name cannot exceed 32 characters.

Subnet

Define the IP address and Subnet Mask used for DHCP discovery and requests between 
the DHCP Server and DHCP clients. The IP address and subnet mask of the pool are 
required to match the addresses of the layer 3 interface for the addresses to be supported 
through that interface.

Domain Name

Provide the domain name used with this pool. Domain names are not case sensitive and 
can contain alphabetic or numeric letters or a hyphen. An FQDN consists of a host name 
plus a domain name. For example, computername.domain.com. 

DNS Servers

Define one or a group of 

Domain Name Servers 

(DNS) to translate domain names to IP 

addresses. Select clear to remove any single IP address as needed. Up to 8 IP addresses 
can be supported.

Summary of Contents for WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands