manualshive.com logo in svg

Motorola WiNG 5.4.2, System Reference Manual

The Motorola WiNG 5.4.2 System Reference Manual is a comprehensive user resource packed with essential information and instructions to optimize your network infrastructure. Available for free download at manualshive.com, this manual provides detailed insights on configuring and utilizing the Motorola WiNG 5.4.2, ensuring seamless operations and enhanced connectivity.

Share
Download
background image

5 - 55

Figure 5-29

Network - L2TPv3 screen - Add T2TP Peer Configuration

12. Define the following Peer parameters:

13. Select 

OK

 to save the peer configuration.

14. Refer to the 

Session 

table to review the configurations of the peers available for tunnel connection.

Select 

+ Add Row

 to populate the table with configurable session parameters for this tunnel configuration.

15. Define the following 

Session

 parameters:

Peer ID

Define the primary peer ID used to set the primary and secondary peer for tunnel failover. 
If the peer is not specified, tunnel establishment does not occur. However, if a peer tries 
to establish a tunnel with this access point, it creates the tunnel if the hostname and/or 
Router ID matches.

Peer IP Address

Select this option to enter the numeric IP address used as the tunnel destination peer 
address for tunnel establishment.

Host Name

Assign the peer a hostname that can be used as matching criteria in the tunnel 
establishment process.

Router ID

Specify the router ID sent in tunnel establishment messages with this specific peer.

Encapsulation

Select either IP or UDP as the peer encapsulation protocol. The default setting is IP. UDP 
uses a simple transmission model without implicit handshakes.

UDP Port

If UDP encapsulation is selected, use the spinner control to define the UDP encapsulation 
port.

IPSEC Secure

Select this option to provide IPSEC security for the tunnel.

IPSEC Gateway

Enter the IP address/Hostname for the IPSEC gateway.

Name 

Enter a 31 character maximum session name. There is no idle timeout for a tunnel. A 
tunnel is not usable without a session and a subsequent session name.The tunnel is 
closed when the last session tunnel session is closed.

Summary of Contents for WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WiNG 5.4.2

H3C MSR810 Hardware Information preview
MSR810
Brand: H3C Pages: 37
H3C MSR 800 Installation Manual preview
MSR 800
Brand: H3C Pages: 41
Ubiquiti UniFi WiFi BaseStationXG UWB-XG-BK Quick Start Manual preview
UniFi WiFi BaseStationXG UWB-XG-BK
Brand: Ubiquiti Pages: 16
Hewlett Packard Enterprise Aruba AP565 Product End-Of-Life Disassembly Instructions preview
Aruba AP565
Brand: Hewlett Packard Enterprise Pages: 6
3Com 3CRWEASYA73 - 11a 54 Mbps Wireless LAN... Quick Start Manual preview
3CRWEASYA73 - 11a 54 Mbps Wireless LAN...
Brand: 3Com Pages: 20
Multitech MultiModem rCell MTCBA-X-EN2 Quick Start Manual preview
MultiModem rCell MTCBA-X-EN2
Brand: Multitech Pages: 16
Jade JadeSpot Quick Start Manual preview
JadeSpot
Brand: Jade Pages: 7
Teldat Connect-4GE Manual preview
Connect-4GE
Brand: Teldat Pages: 24
Loopcomm LP-8696C User Manual preview
LP-8696C
Brand: Loopcomm Pages: 75
EnGenius ECB3500 User Manual preview
ECB3500
Brand: EnGenius Pages: 117
Well Straler B6R-W2 Installation Instructions Manual preview
B6R-W2
Brand: Well Straler Pages: 16
RocketFish RF-HTN104 User Manual preview
RF-HTN104
Brand: RocketFish Pages: 73
Trust 13597 Manual preview
13597
Brand: Trust Pages: 14
Trust 350BR User Manual preview
350BR
Brand: Trust Pages: 21
AAxeon APX-3100 Quick Installation Manual preview
APX-3100
Brand: AAxeon Pages: 14
Franklin 526 QSG Manual preview
526 QSG
Brand: Franklin Pages: 11
Planex BRC-14VG User Manual preview
BRC-14VG
Brand: Planex Pages: 305
V7 IFP User Manual preview
IFP
Brand: V7 Pages: 22

Brands by name

Popular brands

Load more brands