manualshive.com logo in svg

Motorola WiNG 5.4.2, System Reference Manual

Share
Download
Motorola WiNG 5.4.2 System Reference Manual Download Page 275

5 - 209

Figure 5-127

Profile Overrides - Network DNS screen

6. Provide or override the default Domain Name used when resolving DNS names. The name cannot exceed 64 characters.

7. Set or override the following 

Domain Name System 

(DNS) settings:

8. Provide a list of up to three DNS servers to forward DNS queries if DNS resources are unavailable. The DNS name servers 

are used to resolve IP addresses. Use the Clear link next to each DNS server to clear the DNS name server’s IP address from 
the list.

9. Select

 OK

 to save the changes and overrides made to the DNS configuration. Select

 Reset

 to revert to the last saved 

configuration.

5.4.4.4.2 Overriding an ARP Configuration

Overriding the Network Configuration

Address Resolution Protocol

 (ARP) is a protocol for mapping an IP address to a hardware MAC address. ARP provides protocol 

rules for making this correlation and providing address conversion in both directions. This ARP assignment can be overridden 

NOTE: 

A blue override icon (to the left of a parameter) defines the parameter as having 

an override applied. To remove an override, go to the Basic Configuration screen’s Device 
Overrides field and select Clear Overrides. This will remove all overrides from the device.

Enable Domain Lookup

Select this option to enable DNS on the access point. When enabled, human friendly 
domain names can be converted into numerical IP destination addresses. The radio button 
is selected by default.

Enable DNS Server 
Forwarding

Select this option to enable the forwarding DNS queries to external DNS servers if a DNS 
query cannot be processed by the access point’s own DNS resources. This feature is 
disabled by default.

Summary of Contents for WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands