manualshive.com logo in svg

Motorola WiNG 5.4.2, System Reference Manual

Share
Download
Motorola WiNG 5.4.2 System Reference Manual Download Page 168

5 - 102 WiNG 5.4.2 Access Point System Reference Guide 

5.2.6.4 Setting the Certificate Revocation List (CRL) Configuration

Profile Security Configuration

A

 certificate revocation list

 (CRL) is a list of certificates that have been revoked or are no longer valid. A certificate can be 

revoked if the 

certificate authority 

(CA) had improperly issued a certificate, or if a private-key is compromised. The most 

common reason for revocation is the user no longer being in sole possession of the private key. 

To define a CRL configuration that can be applied to a profile:

1. Select the 

Configuration

 tab from the Web UI.

2. Select 

Devices

.

3. Select 

System Profile

 from the options on left-hand side of the UI.

4. Expand the 

Security 

menu and select 

Certificate Revocation

.

Figure 5-61

Profile Security - Certificate Revocation List (CRL) Update Interval screen

5. Select the 

+ Add Row 

button to add a column within the 

Certificate Revocation List (CRL) Update Interval

 table to 

quarantine certificates from use in the network. 

Additionally, a certificate can be placed on hold for a user defined period. If, for instance, a private key was found and 
nobody had access to it, its status could be reinstated.

6. Provide the name of the trustpoint in question within the 

Trustpoint Name

 field. The name cannot exceed 32 characters.

7. Enter the resource ensuring the trustpoint’s legitimacy within the 

URL

 field.

8. Use the spinner control to specify an interval (in hours) after which a device copies a CRL file from an external server and 

associates it with a trustpoint.

9. Select 

OK

 to save the changes made within the 

Certificate Revocation List (CRL) Update Interval 

screen. Select 

Reset 

to revert to the last saved configuration.

Summary of Contents for WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands