Motorola WiNG 5.4.2, System Reference Manual

Page: 442 / 836

6 - 86 WiNG 5.4.2 Access Point System Reference Guide
17. Select OK to update the Smart RF Scanning Configuration settings. Select Reset to revert to the last saved configuration.
18. Select Recovery .
The Neighbor Recovery tab displays by default. Use the Neighbor , Interference , Coverage Hole and Root recovery tabs
to define how 2.4 and 5.0 GHz radios compensate for failed neighbor radios, interference, coverage holes and loss of root
path requiring neighbor radio intervention.
Extended Scan
Frequency Use the spinner control to set an extended scan frequency from 0 - 50. This is the
frequency radios scan channels on non-peer radios. The default setting is 5 for both 2.4
GHz and 5.0 GHz bands.
Sample Count Use the spinner control to set a sample scan count value from 1 - 15. This is the number
of radio RF readings gathered before data is sent to the Smart RF master. The default
setting is 5 for both 2.4 GHz and 5.0 GHz bands.
Client Aware Scanning Use the spinner control to set a client awareness count (0 - 255) during off channel scans
for either the 2.4 or 5.0 GHz radio. The default setting is 0 for both radio bands.
Power Save Aware
Scanning Select either the Dynamic , Strict or Disable radio button to define how power save
scanning is set for Smart RF. Strict disables smart monitoring as long as a power save
capable client is associated to a radio. Dynamic disables smart monitoring as long as
there is data buffered for a power save client at the radio. The default setting is Dynamic
for both 2.4 GHz and 5.0 GHz bands.
Voice Aware Scanning Select either Dynamic , Strict or Disable to define how voice aware recognition is set for
Smart RF. Strict disables smart monitoring as long as a voice client is associated to a radio.
Dynamic disables smart monitoring as long as there is data buffered for a voice client at
the radio. The default setting is Dynamic for both 2.4 GHz and 5.0 GHz bands.