manualshive.com logo in svg

Motorola WiNG 5.4.2, System Reference Manual

Share
Download
Motorola WiNG 5.4.2 System Reference Manual Download Page 170

5 - 104 WiNG 5.4.2 Access Point System Reference Guide 

The 

NAT Pool

 tab displays by default. The NAT Pool tab lists those NAT policies created thus far. Any of these policies can 

be selected and applied to the access point profile.

5. Select 

Add 

to create a new NAT policy that can be applied to a profile. Select 

Edit 

to modify the attributes of a existing 

policy or select 

Delete 

to remove obsolete NAT policies from the list of those available to a profile.

Figure 5-63

Profile Security - NAT Pool tab - NAT Pool field

6. If adding a new NAT policy or editing the configuration of an existing policy, define the following parameters:

7. Select the 

+ Add Row 

button to append additional rows to the 

IP Address Range

 table.

8. Select 

OK

 to save the changes made to the profile’s NAT Pool configuration. Select 

Reset 

to revert to the last saved 

configuration.

9. Select the 

Static NAT

 tab. The

 Source 

tab displays by default.

Name

If adding a new NAT policy, provide a name to help distinguish it from others with similar 
configurations. The length cannot exceed 64 characters.

IP Address Range

Define a range of IP addresses that are hidden from the public Internet. NAT modifies network 
address information in the defined IP range while in transit across a traffic routing device. NAT 
only provides IP address translation and does not provide a firewall. A branch deployment with 
NAT by itself will not block traffic from being potentially routed through a NAT device. 
Consequently, NAT should be deployed with a stateful firewall.

Summary of Contents for WiNG 5.4.2





































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands