Mitel 6873i User Manual Download | Manualshive

Page: 2 / 259

background image

NOTICE

The information contained in this document is believed to be accurate in all respects but is not warranted
by Mitel Networks™ Corporation (MITEL

®

). The information is subject to change without notice and should

not be construed in any way as a commitment by Mitel or any of its affiliates or subsidiaries. Mitel and its
affiliates and subsidiaries assume no responsibility for any errors or omissions in this document. Revisions
of this document or new editions of it may be issued to incorporate such changes.

No part of this document can be reproduced or transmitted in any form or by any means - electronic or
mechanical - for any purpose without written permission from Mitel Networks Corporation.

Trademarks

The trademarks, service marks, logos and graphics (collectively "Trademarks") appearing on Mitel's
Internet sites or in its publications are registered and unregistered trademarks of Mitel Networks
Corporation (MNC) or its subsidiaries (collectively "Mitel") or others. Use of the Trademarks is prohibited
without the express consent from Mitel. Please contact our legal department at l

[email protected]

for

additional information. For a list of the worldwide Mitel Networks Corporation registered trademarks, please
refer to the website:

http://www.mitel.com/trademarks

.

Mitel’s Power Over Ethernet (PoE) Powered Device (PD) products are covered by one or more of the U.S.
patents (and any foreign patent counterparts thereto) identified at Mitel’s website:

www.mitel.com/patents

.

For more information on the PD patents that are licensed, please refer to

www.cmspatents.com

.

Mitel 6873i SIP Phone Release 4.2.0 SP2 User Guide

58014495 REV02 - June 2016

®,™ Trademark of Mitel Networks Corporation

© Copyright 2016, Mitel Networks Corporation

All rights reserved

«
1
2
3
4
...
»

Summary of Contents for 6873i




































































































































































































































































Reviews:

No comments

Related manuals for 6873i

Brand: Panasonic Pages: 24

Brand: Eads Telecom Pages: 2

Brand: Fanvil Pages: 16

Brand: Sagem Pages: 97

Brand: Sagem Pages: 99

Brand: Sagem Pages: 99

Brand: Sagem Pages: 89

Brand: HTC Pages: 4

Brand: Allview Pages: 30

Brand: Pantech Pages: 97

Brand: TWIG Pages: 4

Brand: ZLT Pages: 11

Brand: Samsung Pages: 223

Brand: Samsung Pages: 101

Heaven SCH-U320

Brand: Samsung Pages: 174

Brand: Samsung Pages: 108

Brand: Samsung Pages: 152

Brand: Samsung Pages: 30

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands