Mitel 6873i SIP Phone Release 4.2.0 SP2 User Guide
208
6.
For each account, in the
Value
field, enter the phone number for which you want the
incoming calls to forward to if the phone is in the specified state.
If using the Account mode or Custom mode, you can enter different phone numbers for
each account.
7.
For the No Answer state, in the
No. Rings
field, enter the number of times that the account
rings before forwarding the call to the specified number. Valid values are 1 through 20.
Default is 1.
When using the Account mode or Custom mode, you can enter a different number of rings
for each account. If you use the Mitel Web UI to change the Call Forward Key Mode to
Phone, all accounts synchronize to Account 1.
8.
Click
Save Settings
.
The changes takes affect immediately without a reboot.
USING CALL FORWARD VIA THE IP PHONE UI
Once Call Forward is enabled on your phone, you can access the Call Forward menus by
pressing a pre-configured
Call Forward
key, or by selecting
Options > Call Forward
from the
IP phone UI.
Notes:
1.
If you selected Account mode in Step 5, you can enable/disable each account
or all accounts as applicable. You can enter different phone number for each
enabled state.
2.
If you selected Custom mode, you can enable/disable each account or all
accounts as applicable. You can enter different phone numbers for each enabled
state.
3.
If you selected Phone mode, all accounts are set to the same Call Forward
configuration (All, Busy, and/or No Answer) as Account 1 on the phone. In the
Mitel Web UI, only Account 1 is enabled. All other accounts are greyed out but
use the same configuration as Account 1.
4.
Using the Mitel Web UI, if you make changes to Account 1, the changes apply
to all accounts on the phone. Using the IP phone UI, if you make changes to
any other account other then Account 1, the changes also apply to all accounts
on the phone. When enabling a Call Forward state, you must specify a phone
number for the phone to Call Forward to. The number you specify applies to all
accounts of the same mode.
5.
Number and name of accounts that display to this screen are dependent on the
number and name of accounts configured on the phone. The name for the
account is specified by your System Administrator. Contact your System
Administrator for more information.
Note:
If the BroadSoft BroadWorks Executive and Assistant Services feature is enabled
and your phone is configured with the Assistant’s role, an additional Forward Filtering
option may be available on the Account Configuration page. For information on the
BroadWorks Executive and Assistant Services feature, refer to
BroadSoft BroadWorks
Executive and Assistant Services
on
page 231.
