Mitel 6873i User Manual Download

Page: 80 / 259

Mitel 6873i SIP Phone Release 4.2.0 SP2 User Guide

Configuring the Audio Mode Using the IP Phone UI

Press

on the phone to enter the Options List.

Press the

Audio

icon.

Press the

Audio Mode

icon.

Choose the desired audio mode. Valid values are:

•

Speaker (default)

•

Headset

•

Speaker/Headset

•

Headset/Speaker

Press the

Save

softkey to save your changes.

HEADSET

The

Headset

option allows you to set the volume level for the headset microphone (if

supported).

Configuring Headset Mic Volume Using the IP Phone UI

Press

on the phone to enter the Options List.

Press the

Audio

icon.

IP PHONE UI

Summary of Contents for 6873i




































































































































































































































































Search results

Summary of Contents for 6873i

Reviews:

Related manuals for 6873i

Brands by name

Popular brands

Mitel 6873i, User Manual

Search results

Summary of Contents for 6873i

Reviews:

Related manuals for 6873i

Brands by name

Popular brands