manualshive.com logo in svg

Mitel 6873i, User Manual

The Mitel 6873i is a cutting-edge IP phone that combines advanced features with user-friendly design. Enhance your communication experience with this sleek device by accessing its Quick Reference Manual, available for free download at manualshive.com. Explore its full potential, hassle-free, with our comprehensive user manual.

Share
Download
background image

Handling Calls

167

2.

Press the 

Xfer 

softkey. 

3.

Press the softkey configured for Directory functionality and press a directory entry and then 
the desired number.

4.

Complete either a blind or consultative transfer:

a.

To complete a blind transfer, press 

Dial

 softkey to call the contact and then press the 

Xfer

 softkey before the receiving end answers.

b.

To complete a consultative transfer, press 

Dial

 softkey to call the contact. Remain on 

the line to speak with Party 2 before pressing the press the softkey configured with 
Transfer functionality or 

Xfer 

softkey again to transfer Party 1 to Party 2. 

To cancel the transfer, press the 

Cancel 

softkey on the display screen or press

 

.

Note: 

If you have any additional Directory sources configured, you will need to first 

navigate to the desired Directory folder and then highlight the respective entry or number.

Summary of Contents for 6873i




































































































































































































































































Reviews:

No comments

Related manuals for 6873i

Lanix U200 User Manual preview
U200
Brand: Lanix Pages: 13
Lanix L900 User Manual preview
L900
Brand: Lanix Pages: 25
BENQ-SIEMENS EF51 User Manual preview
EF51
Brand: BENQ-SIEMENS Pages: 132
Samsung SM-G925S User Manual preview
SM-G925S
Brand: Samsung Pages: 50
Samsung SM-G532M/DS User Manual preview
SM-G532M/DS
Brand: Samsung Pages: 37
Samsung SM-G361H/D User Manual preview
SM-G361H/D
Brand: Samsung Pages: 95
Samsung SM-G530H User Manual preview
SM-G530H
Brand: Samsung Pages: 131
Samsung SM-G960N User Manual preview
SM-G960N
Brand: Samsung Pages: 153
Samsung SM-G780G User Manual preview
SM-G780G
Brand: Samsung Pages: 155
Samsung SM-F936U1 User Manual preview
SM-F936U1
Brand: Samsung Pages: 189
Samsung R225 - SGH Cell Phone Manual Del Usuario preview
R225 - SGH Cell Phone
Brand: Samsung Pages: 65
Samsung SGH-D900B User Manual preview
SGH-D900B
Brand: Samsung Pages: 118
Samsung SM-G611MT/DS User Manual preview
SM-G611MT/DS
Brand: Samsung Pages: 38
Smartlink MEDI-CALL UNIT User Manual preview
MEDI-CALL UNIT
Brand: Smartlink Pages: 8
Netway 4.5 qHD User Manual preview
4.5 qHD
Brand: Netway Pages: 68
Sony Ericsson S700i Installation Instruction, Electrical preview
S700i
Brand: Sony Ericsson Pages: 8
Avaya T3 Classic Operating Instructions Manual preview
T3 Classic
Brand: Avaya Pages: 172
BLU Products Life Pure Service Manual preview
Life Pure
Brand: BLU Products Pages: 22

Brands by name

Popular brands

Load more brands