Mitel 6873i User Manual Download

Page: 57 / 259

Customizing Your Phone

TIME AND DATE

On the IP phones, the following time and date sub-options are available to be configured:

•

Settings:

•

Time Format

•

Daylight Savings

•

Date Format

•

Time Zone

•

Set Date and Time:

•

Use Network Time (configure time servers)

•

Enter Time and Date

SETTINGS

Configuring the Time Format, Daylight Savings, and Date Format Using the IP Phone
UI

Press

on the phone to enter the Options List.

Press the

Time and Date

icon.

Press the

Settings

icon.

Choose the desired time format. Valid values are 12 Hour and 24 Hour (the default is 12
Hour).

Note:

All time and date settings can be configured using the IP phone UI. Time/Date

Formats and Time Servers are the only two time and date settings that can be configured
using the Mitel Web UI.

IP PHONE UI

Summary of Contents for 6873i




































































































































































































































































Search results

Summary of Contents for 6873i

Reviews:

Related manuals for 6873i

Brands by name

Popular brands

Mitel 6873i, User Manual

Search results

Summary of Contents for 6873i

Reviews:

Related manuals for 6873i

Brands by name

Popular brands