Mitel 6873i User Manual Download

Page: 68 / 259

Mitel 6873i SIP Phone Release 4.2.0 SP2 User Guide

CONNECTING TO A DIFFERENT PAIRED BLUETOOTH HEADSET

Press

on the phone to enter the Options List.

Press the

Bluetooth

icon.

Ensure Bluetooth functionality is enabled. If it is not enabled, swipe the Bluetooth toggle
button to the right.

In the

Paired Devices

list, press the desired Bluetooth headset you want to connect to.

The phone attempts to connect to the headset.

Press the

button to acknowledge the successful connection.

The connected Bluetooth headset is ready to use.

IP PHONE UI

Note:

If connecting fails, an error message displays on screen. Press

Retry

attempt to connect again, or

Cancel

to cancel the attempt.

Summary of Contents for 6873i




































































































































































































































































Search results

Summary of Contents for 6873i

Reviews:

Related manuals for 6873i

Brands by name

Popular brands

Mitel 6873i, User Manual

Search results

Summary of Contents for 6873i

Reviews:

Related manuals for 6873i

Brands by name

Popular brands