Mitel 6873i User Manual Download

Page: 62 / 259

Mitel 6873i SIP Phone Release 4.2.0 SP2 User Guide

In the

Date Format

field, select the date format you want to use on your phone. Valid values

are:

•

WWW MMM DD (default)

•

DD-MMM-YY

•

YYYY-MM-DD

•

DD/MM/YYYY

•

DD/MM/YY

•

DD-MM-YY

•

MM/DD/YY

•

MMM DD

•

DD MMM YYYY

•

WWW DD MMM

•

DD MMM

•

DD.MM.YYYY

In the

NTP Time Servers

field, enable the setting by checking the box or disable the setting

by unchecking the box (default is enabled).

In the

Time Server 1, Time Server 2

, and

Time Server 3

fields, enter IP addresses or

qualified domain names for the primary, secondary, and tertiary time servers.

Click

Save Settings

Note:

The date format you configure is applicable to the phone’s

Home

screen as

well as the Received Callers and Outgoing Redial Lists.

Note:

Time servers can only be entered if

NTP Time Servers

is enabled.

Summary of Contents for 6873i




































































































































































































































































Search results

Summary of Contents for 6873i

Reviews:

Related manuals for 6873i

Brands by name

Popular brands

Mitel 6873i, User Manual

Search results

Summary of Contents for 6873i

Reviews:

Related manuals for 6873i

Brands by name

Popular brands