Mitel 6873i Page 112 User Manual Download

Page: 112 / 259

Mitel 6873i SIP Phone Release 4.2.0 SP2 User Guide

110

CONFIGURING A BLF/LIST KEY USING THE MITEL WEB UI

If you set a key to use BLF/List, you must also enter a

BLF List URI

Operation > Softkeys

and XML > Services

. The

BLF List URI

is the name of the BLF list defined on the BroadSoft

BroadWorks Busy Lamp field page for your particular user. For example,
sip:[email protected]. The value of the

BLF List URI

parameter must match the list name

configured. Otherwise, no values display on the 6873i screen and the feature is disabled.

Click on

Operation > Softkeys and XML

or
Click on

Operation > Expansion Module <N>

Softkeys

Select from

Key 1

through

Key 48

on the Top keys.

In the

Type

field, select

BLF/List

(BroadSoft BroadWorks).

In the

Line

field, select a line number that is actively registered to the appropriate SIP proxy

you are using. Valid values are:

•

global

•

through

In the state fields, check (enable) or uncheck (disable) the states you want to apply to this
softkey.

In the

BLF List URI

field, enter the name of the BLF list defined on the BroadSoft Broad-

Works Busy Lamp field page for your particular user. For example, sip:[email protected].

MITEL WEB UI

Note:

The

Label

and

Value

field are not required. The BroadWorks BLF/List name is

configured in the

BLF List URI

field instead.

Note:

Contact your System Administrator for the

BLF List URI

Summary of Contents for 6873i




































































































































































































































































Search results

Summary of Contents for 6873i

Reviews:

Related manuals for 6873i

Brands by name

Popular brands

Mitel 6873i, User Manual

Search results

Summary of Contents for 6873i

Reviews:

Related manuals for 6873i

Brands by name

Popular brands