Mitel 6873i User Manual Download

Page: 131 / 259

Configuring Softkeys

129

SPEED DIAL/CONF

The 6873i allows you to configure a softkey or expansion module key to be used as a speed
dial conference key (

Speed Dial/Conf

key) while remaining in the current call. This key allows

a user on a call to conference another party at a pre-defined number while remaining in the call.

For example, while on an active call, a user can use the

Speed Dial/Conf

key to dial a recording

service and have the resulting conference recorded.

If you configure a softkey or expansion module key as a

Speed Dial/Conf

key and you press

this key while on an active call, the focused line changes to the dialing line. A

Cancel

softkey

displays on the phone allowing you to abort the conference speed dial if required.

CONFIGURING A SPEED DIAL/CONF KEY USING THE MITEL WEB UI

Click on

Operation > Softkeys and XML

or
Click on

Operation > Expansion Module <N>

Softkeys

Select from

Key 1

through

Key 48

on the Top keys.

or
Select from

Key 1

through

Key 30

on the Bottom keys.

In the

Type

field, select

Speed Dial/Conf

In the

Label

field, enter a label for the Speed Dial/Conf key.

In the

Value

field, enter the speed dial extension or the extension to add to the conference

(for example, 3600).

Note:

If currently in a conference, the

Speed Dial/Conf

key is disabled on the active call.

Note:

This feature is not compatible with centralized conferencing.

MITEL WEB UI

Summary of Contents for 6873i




































































































































































































































































Search results

Summary of Contents for 6873i

Reviews:

Related manuals for 6873i

Brands by name

Popular brands

Mitel 6873i, User Manual

Search results

Summary of Contents for 6873i

Reviews:

Related manuals for 6873i

Brands by name

Popular brands