Mitel 6873i Page 73 User Manual Download

Page: 73 / 259

Customizing Your Phone

Press the left and right arrow buttons on the feature tab to navigate to the desired feature
(e.g. LDAP, Microsoft Exchange, BroadSoft Xsi).

Press the

Username

field and enter in the username applicable to the Directory source.

Press the

Password

field and enter in the password applicable to the Directory source.

Repeat Steps 3 to 5 for any other features you want to configure.

Press the right arrow button on the features tab until you reach the

Test Connection

tab.

Press the checkboxes corresponding to the features you want to test to enable authenti-
cation/connection testing on the features.

Press the

Test

softkey to begin testing.

A green



will appear if there are no issues with the authentication/connection to the

external source.

A red

will appear if issues are found.

If there are issues with your connection, please check your username and password for
any errors.

10.

Press the

Save

softkey to save your changes.

Summary of Contents for 6873i




































































































































































































































































Search results

Summary of Contents for 6873i

Reviews:

Related manuals for 6873i

Brands by name

Popular brands

Mitel 6873i, User Manual

Search results

Summary of Contents for 6873i

Reviews:

Related manuals for 6873i

Brands by name

Popular brands