Mitel 6873i User Manual Download

Page: 196 / 259

Mitel 6873i SIP Phone Release 4.2.0 SP2 User Guide

194

Press an entry and press the right arrow button or

Details

softkey to see more detailed

information about the Received Callers List entry.

To dial the displayed number while in the Received Callers List, press the

Dial

softkey,

press

, lift the handset, or press any of the line keys.

To exit the Received Callers List, press the

key,

key, or the

Quit

softkey.

EDITING ENTRIES IN THE RECEIVED CALLERS LIST

In the Received Callers List, pressing the

Edit

softkey allows you to edit the entry’s name and/or

number prior to dialing out or copying to the Local Directory.

Press the

key.

Swipe up and down to scroll through the entries in the Received Callers List.

Press an entry and press the right arrow button or

Details

softkey to see more detailed

information about the Received Callers List entry.

Note:

The detailed view screen contains the picture ID of the caller (if available), the

date and time of the incoming call, the line on which the call was received, call duration
(if the call was answered), any applicable call feature indicators, and the caller ID details.

IP PHONE UI

Summary of Contents for 6873i




































































































































































































































































Search results

Summary of Contents for 6873i

Reviews:

Related manuals for 6873i

Brands by name

Popular brands

Mitel 6873i, User Manual

Search results

Summary of Contents for 6873i

Reviews:

Related manuals for 6873i

Brands by name

Popular brands