Mitel 6873i User Manual Download

Page: 59 / 259

Customizing Your Phone

•

MMM DD

•

DD MMM YYYY

•

WWW DD MMM

•

DD MMM

•

DD.MM.YYYY

Press the

Save

softkey to save your changes.

TIME ZONE

Configuring the Time Zone Using the IP Phone UI

Press

on the phone to enter the Options List.

Press the

Time and Date

icon.

Press the

Time Zone icon.

A list of time zones displays for different areas of the world.

Swipe up and down to scroll through the region list and highlight the desired region. Valid
values are:

•

America

•

Asia

•

Atlantic

•

Australia

•

Europe

•

Pacific

•

Others

Note:

The time and date formats you configure are applicable to the

Home

screen as

well as the Missed/Received Callers and Outgoing Redial Lists.

IP PHONE UI

Summary of Contents for 6873i




































































































































































































































































Search results

Summary of Contents for 6873i

Reviews:

Related manuals for 6873i

Brands by name

Popular brands

Mitel 6873i, User Manual

Search results

Summary of Contents for 6873i

Reviews:

Related manuals for 6873i

Brands by name

Popular brands