Mitel 6873i User Manual Download

Page: 105 / 259

Configuring Softkeys

103

Press the desired type of keys you want to edit (e.g. Top Softkeys) and press the

Select

softkey.

Press the desired key’s

Label

field (if applicable) and enter a label to apply to the key.

Press the

Number

field (if applicable) and enter a number for the key using the on-screen

keyboards.

Press the

Line

field and select a line to apply to the key. This is the line that the phone

opens to dial the number after you press the respective

Speed Dial

key. By default, the

phone uses Line 1 for the

Speed Dial

key. If you want to use a different line, press the left

or right arrow buttons to select another line.

Press the

Save

softkey to save the speed dial information to the key you selected.

CREATING A SPEED DIAL SOFTKEY USING THE MITEL WEB UI

Click on

Operation > Softkeys and XML

or
Click on

Operation > Expansion Module <N>

Softkeys

Select from

Key 1

through

Key 48

on the Top keys.

or
Select from

Key 1

through

Key 30

on the Bottom keys.

MITEL WEB UI

Summary of Contents for 6873i




































































































































































































































































Search results

Summary of Contents for 6873i

Reviews:

Related manuals for 6873i

Brands by name

Popular brands

Mitel 6873i, User Manual

Search results

Summary of Contents for 6873i

Reviews:

Related manuals for 6873i

Brands by name

Popular brands