Mitel 6873i User Manual Download

Page: 244 / 259

Mitel 6873i SIP Phone Release 4.2.0 SP2 User Guide

242

Press the

Options

key and then navigate to the Call Forward menu

or
Press the

Call Forward

softkey.

Press the Forward Filtering number field and enter the applicable forwarding number.

Press the checkbox beside the Forward Filtering number field.

A checkmark will be displayed indicating call forwarding of all filtered calls is to be activated.

Press the

Save

key to save your changes.

The idle screen status bar will display the Call Forward

icon and the MWI and (if

configured) Call Forward softkey LEDs will be lit indicating Forward Filtering is activated.

To Deactivate Call Forwarding of Filtered Calls

Use the following procedure to deactivate call forwarding of filtered calls:

Click on

Basic Settings->Account Configuration

Remove the checkmark in the “

Enabled

” box beside the “

Divert

” option under “

Forward

Filtering

”.

Click

Save Settings

IP PHONE UI

MITEL WEB UI

Summary of Contents for 6873i




































































































































































































































































Search results

Summary of Contents for 6873i

Reviews:

Related manuals for 6873i

Brands by name

Popular brands

Mitel 6873i, User Manual

Search results

Summary of Contents for 6873i

Reviews:

Related manuals for 6873i

Brands by name

Popular brands