Mitel 6873i User Manual Download

Page: 129 / 259

Configuring Softkeys

127

SPEED DIAL/XFER

The

Speed Dial

key allows a number to be dialed quickly by pressing one key configured for

speed dialing. The

Transfer

key allows a call to be transferred to other recipients blindly or

consultatively. The

Speed Dial/Xfer

key combines the

Speed Dial

and

Transfer

keys’

functionality together allowing the user to transfer calls or speed dial with one key.

SPEED DIAL/XFER KEY REQUIREMENTS AND FUNCTIONALITY

The

Speed Dial/Xfer

key has the following capabilities:

•

Speed Dial/Xfer and Speed Dial: When the phone is in the idle state, pressing the

Speed

Dial/Xfer

key causes the phone to go offhook and dial the predefined extension.

•

Speed Dial/Xfer and Blind Transfer: When the phone is connected to a call, pressing the

Speed Dial/Xfer

key blind transfers the call to the predefined target.

If transferring a call fails, a message

Transfer Failed

displays, and you can reconnect the call

(get the call back) by pressing the line key again.

•

Speed Dial/Xfer and Call Forward: When the phone is in the ringing state, pressing the

Speed Dial/Xfer

key forwards the call to the predefined extension.

CONFIGURING A SPEED DIAL/XFER KEY USING THE MITEL WEB UI

Click on

Operation > Softkeys and XML

or
Click on

Operation > Expansion Module <N>.

Softkeys

Select from

Key 1

through

Key 48

on the Top keys.

or
Select from

Key 1

through

Key 30

on the Bottom keys.

In the

Type

field, select

Speed Dial/Xfer

Note:

It is recommended that you enable the

Switch UI Focus to Ringing Line

parameter when using the Speed Dial/Xfer feature. For more information about this
parameter, see

“Switch UI Focus to Ringing Line”

page 217

MITEL WEB UI

Summary of Contents for 6873i




































































































































































































































































Search results

Summary of Contents for 6873i

Reviews:

Related manuals for 6873i

Brands by name

Popular brands

Mitel 6873i, User Manual

Search results

Summary of Contents for 6873i

Reviews:

Related manuals for 6873i

Brands by name

Popular brands